istardentallab.com

Custom Sports Mouth Guard — Lab-Grade Protection for Athletes

Professional Fabrication Meets Performance Demands

When dental practices prescribe custom athletic mouth guards for their patients, the fabrication quality determines whether protection actually works on the field. Istar Dental Lab manufactures custom sports mouth guards using the same thermoforming processes, quality controls, and material standards that govern our night guard and occlusal appliance production—applying proven dental lab precision to athletic protection.

Since 2012, Istar has operated in-house dental manufacturing facilities in Shenzhen and Huizhou, China. Our 460-person technical team produces crowns, bridges, dentures, implants, and dental appliances for 50+ labs, 100+ clinics, and 400+ dentists across the US and Europe. Our appliance fabrication experience includes custom-made occlusal splints, night guards, soft guards, dual-laminate guards, and retainers—capabilities that directly translate to sports mouth guard production.

All guards are fabricated to prescription specification under FDA registration, ISO 13485 certification, and full case traceability. This is professional dental manufacturing, not commodity sporting goods production.


What We Manufacture: Custom Athletic Mouth Guards

Product Overview

Fabrication method: Thermoforming (vacuum-pressure lamination). We use the same heat-press forming process verified in our quality system for night guards and occlusal splints—dental-grade EVA sheet material is heat-softened, vacuum-formed onto patient-specific models, and pressure-laminated with controlled cooling to prevent warping.

Material types available:

  • Soft EVA guards: Lighter cushioning for moderate-contact sports
  • Dual-laminate guards: Soft inner layer + firmer outer shell for high-impact contact sports (football, rugby, lacrosse, martial arts)

Prescription requirements: Prescribing dentist specifies sport type, arch (upper or lower), material selection (soft or dual-laminate), and any special instructions. Thickness and hardness specifications are determined by the dental professional based on sport intensity, patient occlusion, and protection needs—our knowledge base confirms this is a clinical decision, not a lab default.

What we need from you: Digital STL scan or physical impression + bite registration + prescription form indicating sport, arch, material preference, and thickness guidance.

Why Custom Fabrication for Sports

High school and collegiate athletic programs increasingly require "properly fitted" mouth guards rather than accepting boil-and-bite retail devices. The clinical rationale is documented in dental and sports medicine literature:

  • Retention that does not depend on clenching: the ADA says a mouthguard needs "adequate retention" to hold a resilient, protective surface over the arch at highest risk of injury (typically the maxilla). Stock guards fail that on their own terms — the ADA describes them as prefabricated without adaptation to the user's mouth and as requiring "the mouth to be shut to keep the device in place", with "frequent repositioning needed" during activity (ADA guidance on athletic mouth protectors)
  • Thickness that is measured, not assumed: studies consistently show that custom-made guards with adequate labial and occlusal thickness protect against intraoral injury by providing a resilient surface that distributes and dissipates impact forces (FDI guidance on mouthguard design). The same guidance draws the line between types by who sets the fit: a stock guard has "minimal scope for adjustment to fit the user's mouth", a boil-and-bite guard is "customisable once placed in hot or boiling water" — the athlete, not a lab, decides how well it fits — while a custom-made guard is "only available through dentists or other dental professionals working to the instruction of a dentist", built from impressions or a 3D scan of the dentition.
  • Lab quality control: Each guard undergoes thickness verification, edge inspection, and retention testing before release—standards not applicable to over-the-counter products

Manufacturing Process: From Prescription to Finished Guard

1. Case Receiving & Pre-Production Verification

Digital workflow (preferred):

  • Accept STL files from the scanners clinics already use — we work with 3Shape TRIOS, Medit, iTero, CEREC (Sirona), Shining3D Aoralscan, and Planmeca, and with any scanner that exports a standard open file. STLs, PLYs, and OBJs are all fine (KB: G087)
  • Prescription form: sport type, arch selection, material preference, thickness guidance, special instructions
  • Bite registration required: Digital bite scan or occlusion STL. Our knowledge base confirms we "verify bite registration on articulator" before fabrication to ensure centric relation and balanced contact

Physical impressions:

  • Impressions (VPS / polyether preferred for cross-border) + bite wafer + work order
  • Impressions are disinfected on arrival in a dedicated receiving area before entering production (KB: G114)
  • Models are packed with transparent air-cushion sleeves to resist breakage and compression in transit (KB: G117)

Pre-production review: your case manager checks the work order for completeness and the scan for usability — generally confirmed within 1 working day of receipt (KB: G096). Missing or inadequate data triggers contact from us rather than a silent wait, because time spent waiting on data does not count against the promised turnaround.

Design review: design work includes 1 design with 2 free rounds of modification (KB: G105). Technical questions are answered by the technical director; design changes are approved by the production manager and the factory manager (KB: G083).

2. Model Fabrication & Design Planning

Model preparation: Patient scan is converted to a working model on our in-house dental light-curing printers. Our quality system confirms that "printed models scan more accurately" than milled models for appliance work—both are used to build denture products, but the printed route gives the more accurate scan.

Design specification: Technicians define guard perimeter, margin extension, and retention zones per prescription. Thickness and material hardness follow the prescribing dentist's specification—our team does not independently alter clinical decisions Occlusal verification: Bite registration mounted on articulator to confirm centric relation. KB procedure: (verify digital scan and bite record, then re-verify on articulator).

3. Thermoforming & Lamination

Process control (verified from KB C040 quality procedures):

  • Dental-grade EVA sheet material heated uniformly to controlled softening temperature
  • Vacuum-pressure lamination with gradual pressure ramp prevents air pockets and incomplete adaptation
  • Controlled cooling under maintained pressure until full material hardening—prevents warping or model detachment (KB: "均匀加热,稳定加压,保压下匀速冷却至硬化脱模")

Dual-laminate fabrication: Soft inner layer formed first; firmer outer layer laminated sequentially. Post-cure bond integrity verified.

Material traceability: every case is bound to a unique number, with the technician, the equipment, the raw material batch, and the inspection result at each stage recorded and archived, so the whole chain is reconstructible (KB: G031). If a material ever has to be changed, we tell you before we change it and it goes through your approval — we do not substitute quietly (KB: G035).

4. Trimming, Finishing & Three-Stage Quality Inspection

QC checkpoints (per KB-verified process):

  1. Incoming material/data check: Verifies scan quality, prescription completeness, material batch conformance
  2. In-process inspection: Mid-fabrication checkpoint during forming and trimming
  3. Final release by independent QC staff: Dedicated inspectors (separate from production technicians) perform final verification

Inspection criteria (extracted from KB C009 / G147 quality standards):

  • Thickness verification: Caliper measurement at multiple points to confirm prescription spec
  • Edge smoothness: Full-perimeter tactile and visual check; hand-polished until smooth, no sharp edges or burrs
  • Margin quality: Smooth, rounded edges with no sharp projections or tissue irritation points
  • Retention test: The guard is seated on and lifted off the stone model, and the snap-and-hold retention is assessed
  • Material integrity: No cracks, bubbles, voids, or delamination

Failed QC: A case that fails final inspection is redone automatically on our side — it does not come back to you for a decision, and it does not ship as-is (KB: G151). Our internal figure for first-pass final-inspection release is 95%, which counts only cases that passed on the first inspection and excludes anything that passed after rework (KB: G137) — we publish the definition because a "pass rate" without its denominator is not a useful number.

5. Packaging & Shipment

Packaging procedure (KB-verified):

  • High-pressure cleaning removes residual material
  • Individual sealed packaging with patient ID label
  • Foam-cushioned box prevents transit damage
  • Multi-case shipments: packing list + individual patient identification

Shipment tracking: Full courier tracking; case manager monitors delivery and alerts to delays.


Quality Management & Regulatory Compliance

FDA Registration & ISO Certification

  • FDA: establishment registration and device listing, publicly verifiable in the FDA public database
  • ISO 13485: certified medical device quality management system
  • EU MDR: custom device route under Annex XIII, with custom declaration and technical file retained
  • MHRA: current UK registration on file (KB: G021)

Certificate and registration documents can be supplied as downloadable electronic copies within the scope we are authorised to share; anything restricted stays restricted (KB: G029).

Material Safety & Biocompatibility

  • Dental-grade sheet material: Selected per product, with biocompatibility requirements for intraoral use
  • Allergy-driven material choice available: We can supply nickel-free, beryllium-free, or other allergy-driven material options (KB: G215)
  • Documentation available: Material brand, country of origin, batch number, and certificates of conformity / material certificates can be issued per case and handed to the client for review on request (KB: G030). Our lab holds ISO 13485; our material suppliers hold CE and ISO 10993 (KB: G038)

Case Traceability & Record Retention

Every case traceable to:

  • Prescribing office or lab account
  • Patient identifier (clinic's internal case number—full name NOT required)
  • Material lot number and supplier batch documentation
  • Technician work records and QC inspection logs
  • Digital design files

Retention period: Prescription, design-approval, and production records are normally retained for 3 months. If you need a longer retention window, tell us in advance and we will extend it (KB: G032).

Patient privacy: Full patient names not required for fabrication. Clinics may use internal ID numbers only. No patient data used for marketing without written authorization.


Cooperation Workflow for Dental Practices & Labs

1. Account Setup & Trial Cases

  • Trial and small-batch welcome: First-time customers may submit single test case to verify quality. For ongoing partnerships, lab accounts require monthly $500 minimum billing to ensure sustainable collaboration (KB: G061)
  • Lab-to-lab white-label: All packaging and communications carry no Istar branding. We do not contact your dentist customers—protecting your client relationships is a core principle
  • Account setup: Contact sales for B2B pricing, upload instructions, and assigned case manager

2. Case Submission

Digital cases: Send the data to our email or your preferred data-transfer platform; if the case portal is down, email or WhatsApp works as a fallback (KB: G012, E121). Required with the file: sport, arch, material preference, and thickness guidance.

Physical impressions: Ship the impression, bite wafer, and work order to our Shenzhen address. We can provide the shipping waybill for you, or you can send it yourself and give us the tracking number (KB: G012).

Impression material matters for cross-border cases. Alginate loses water and shrinks, is prone to mould, and can raise customs-quarantine issues, so it is not suitable for international shipment. For cases crossing borders we ask for VPS / polyether (KB: G108).

3. Production Timeline

Turnaround basis: Our production timeline is counted in business days (工作日). China domestic weekends and public holidays are not scheduled for production or shipping—these extend timelines accordingly (KB: G161). Design approval waiting periods, missing-data supplements, and customer response delays do not count toward committed technician turnaround; the clock restarts from when complete data or customer confirmation is received (KB: G157).

Rush service: Rush cases are available (KB: G164–G166). Rush production is confirmed case-by-case and may be subject to additional charges depending on volume. Rush requests can be made before or after case submission. Emergency or technically complex cases may be flagged for priority handling (KB: G167).

Peak capacity management: We plan production based on predictable order patterns, leverage internal overtime during peak seasons, and stagger production stages to increase capacity. When orders exceed carrying capacity, we negotiate with clients for split shipments or adjusted timelines—never compromising QC standards (KB: G131).

Large batch impact: For sudden large-batch orders, factory evaluates capacity load; already-scheduled cases are prioritized; new large orders may be batched or scheduled for later delivery to protect existing timelines (KB: G132).

When something goes wrong on our side: if production, equipment, or a material shortage puts your case at risk, we assess the impact immediately and tell you proactively — with the cause, an estimated delay, and the alternatives — rather than waiting for the original delivery date to pass (KB: G136).

Peak-season deadlines: we publish case cut-offs and delivery dates according to what each account needs, so ask your case manager for the dates that apply to your programme (KB: G162).

4. International Shipping

Carriers: DHL, FedEx, UPS, and SPIDER (France) (KB: G169)

Shipping account benefits: Clients may ship using our factory account and enjoy negotiated bulk rates (KB: G172)

Delivery timeline basis: Shipping time refers only to carrier transit. Customs clearance and remote-area delivery take additional time and are not included in quoted shipping duration (KB: G158). Contact your case manager for destination-specific estimates.

Customs: We handle export documentation; clients responsible for import duties.

5. Quality Issues & Remakes

Manufacturing defects — wrong spec, improper fabrication, material flaw:

  • Most rework is free. If a case fails our own final inspection it is remade automatically without coming back to you first (KB: G151, G068).
  • Rework is charged only where we flagged a limitation up front and you asked us to proceed anyway (for example an unclear model) (KB: G068).

Cases delayed by technical questions or a re-scan / re-impression: handled as special-priority cases, and the promised turnaround restarts once complete data or your confirmation is in (KB: G167, G157).

Shipping loss or transit damage: you claim against the carrier and we supply the order records to support it. Document any transit damage within 24 hours with unboxing video showing the courier label, the damaged item, and the original packaging (KB: G183, G184).


Value Considerations

Custom vs. Stock Guards: Decision Context

Stock and boil-and-bite retail devices:

  • Immediate availability at low cost — the one vendor comparison we found puts stock / boil-and-bite guards at roughly 10–25, and no authoritative retail price survey exists for this category
  • The fit is set by the user rather than by a lab: FDI describes a boil-and-bite guard as "customisable once placed in hot or boiling water", while a stock guard has "minimal scope for adjustment to fit the user's mouth"
  • Comfort and retention tend to fall away with use, and there is no published fixed replacement interval for this category

Custom lab-fabricated guards:

  • Professional prescription and lab fabrication
  • Verified fit, controlled thickness, reproducible quality
  • Digital case data retained, and retention extendable on request, so a replacement can be produced without re-impressing

Clinical Evidence & Professional Guidelines

Why Custom Fabrication Matters

Research in sports dentistry demonstrates:

  • Gold-standard fabrication: "Custom-made mouthguards are the gold standard", and the same study states that a guard's material properties and its geometrical/structural attributes drive its protective performance — its simulations tested layer stiffness, thickness, and internal space inclusion, alone and in combination (design research on customized mouthguards)
  • Thickness has to be verified, not assumed: vacuum forming pulls the sheet thin over the occlusal and facial contours, so the number that matters is the finished thickness rather than the nominal sheet gauge. In our process the finished guard is measured with calipers at multiple points and checked against the prescription before it is released.
  • Compliance: Athletes more likely to consistently wear comfortable, well-fitting protection

Regulatory Framework & Standards

  • ADA: Recommends properly fitted mouth guards to reduce incidence and severity of oral injury in contact/collision sports
  • ANSI/ADA Standard No. 99: Athletic Mouth Protectors and Materials—specifies physical properties, test methods, Type I/II/III classification
  • ASTM F697: Standard Practice for Care and Use of Athletic Mouth Protectors
  • NFHS: Mandates mouth guard use in football, ice hockey, lacrosse, field hockey (participating US states)
  • NCAA: Requires mouth guards in designated sports; many programs specify "custom-fitted" devices

FAQ: Common Questions from Dental Professionals

Can I submit cases for athletes with orthodontic appliances?

Yes. Send clear scans or impressions showing bracket and wire positions, and we fabricate around the current hardware. Expect a replacement after the appliance comes off or after significant tooth movement — tooth movement, brackets, wires, loose primary teeth, and eruption all make an otherwise accurate guard obsolete. If the patient is in active orthodontic treatment you will be re-scanning periodically; the "every 6–12 months" figure circulating in practice is a vendor/clinical-practice recommendation, not an evidence-based interval.

What if athlete is in mixed dentition (losing primary teeth)?

Custom guards can be made for pediatric patients, but loose primary teeth and ongoing eruption make the fit short-lived, so plan on replacement. Mixed dentition is one of the cases that genuinely needs extra planning rather than a default prescription. Whether a custom guard or a stock device is the better call at that moment is a clinical judgement about the individual child — tell us the eruption stage and we will tell you honestly whether we think the case is worth fabricating.

How do I verify guard thickness after delivery?

Measure against the thickness you prescribed, not against a number on this page. Our own inspection is caliper measurement at multiple points checked against the prescription, so if you want to verify on your side, measure at the same points and compare to your own work order. If it does not match, send your case manager the measurements and a photo rather than a description — it is much faster to act on.

What is your remake policy?

Manufacturing defects (wrong spec, improper fabrication, material flaws): remade at no charge. A case that fails our own final inspection is redone automatically, without waiting for your instruction.

Fit issues traceable to the submitted data: material choice is normally marked by the doctor on the work order, so a mismatch there is not a quality failure on our side. If we told you in advance that the data was marginal and you asked us to proceed anyway, that rework is chargeable.

Delay caused by a re-scan or re-impression: treated as a special-priority case, and the turnaround clock restarts from the day complete data arrives.

Can you ship directly to athletes' home addresses?

Our default is to ship to the prescribing dental office or the lab account holder, which keeps the case inside the traceability chain and keeps you in control of the patient relationship. Direct-to- athlete delivery is not something we offer by default — if an institutional programme genuinely needs it, raise it with your case manager and we will tell you honestly whether we can accommodate it.

Do you offer team colors or custom branding?

Ask us. Colour tinting, team logos, and other custom graphics exist in this product category, but we are not going to publish a catalogue of colours, minimum quantities, and lead times we have not confirmed for our own production line. Send us the artwork and quantity and we will tell you plainly what is feasible and what it costs.

How do I start with a trial case?

Email sales team with:

Practice/lab name and location

"Trial case: custom sports mouth guard"

Sport type, arch preference, material selection

Whether submitting digital files or physical impressions

We then confirm pricing and assign you a named case manager with a support team behind them (KB: G014). We sign NDAs, quality agreements, or supplier agreements whenever you need them, and we complete supplier onboarding questionnaires and annual audits (KB: G018, G019). If you want to audit the quality system, production records, or supplier records, that is open to you (KB: G034).


Why Dental Professionals Choose Istar

In-House Manufacturing = Quality Control

We own and operate production facilities—not a broker network. Every fabrication step occurs under our QMS with no third-party outsourcing. This ensures:

  • Consistent process control and material traceability
  • Direct communication between case manager, technicians, QC staff
  • Rapid response to quality issues or modifications

Proven Track Record in Dental Manufacturing

Since 2012, Istar has run in-house production in Shenzhen and Huizhou across every major prosthetic category. Published monthly capacity:

  • Zirconia crowns: ~8,000 units in a normal month, up to ~15,000 at peak
  • Bridges: ~2,000 cases normal, ~3,000 peak
  • All-on-X: ~20 normal, ~40 peak
  • Removable prosthetics: ~4,000 normal, ~6,500 peak

Appliance work—night guards, occlusal splints, and retainers—runs on the same lines, the same thermoforming equipment, and the same inspection regime as the restorative work (KB: G004, G005, G007).

Sports mouth guard fabrication uses the same quality system, inspection protocols, technician training governing our restorative work. Dental lab precision, not commodity manufacturing.

Full Regulatory Compliance & Traceability

  • FDA registered, ISO 13485 certified, EU MDR custom device notification
  • Every case traceable to material batch, technician records, QC logs
  • Biocompatibility documentation available for institutional procurement

Responsive Communication & Technical Support

  • Dedicated case manager for every account
  • English-language support for US/European clients
  • Technical questions answered within 1 hour during business hours (GMT+8), <12 hours after-hours
  • Clinical consultation available for complex cases

Scalable Production for Team Orders

Our roughly 460-person technician base, plus about 50 standby helpers brought in for peak periods, is configured against order volume rather than a fixed guard quota. In peak season we plan ahead, absorb demand through internal overtime and staggered scheduling, and prioritise cases that already have a confirmed slot. When a large order genuinely exceeds what we can carry, we will tell you and propose splitting the delivery or moving the new order's date — we do not shorten inspection to make a date (KB: G006, G131, G132).

Fall football and spring lacrosse are the busy windows. Tell us your programme's case deadline as early as you can and we will tell you honestly whether we can hit it.

White-Label Partnership Protection

For lab-to-lab partnerships: All packaging, communications, documentation carry no Istar branding. We never contact your dentist customers. Protecting your client relationships is a core operating principle, not a negotiable add-on.


Ready to Begin?

New customers: Contact sales for B2B pricing, trial case setup, account onboarding.

Existing partners: Submit next case through established workflow.

Team contracts & institutional buyers: Discuss volume pricing, delivery schedules, compliance documentation for schools/athletic programs.

Technical consultation: Assigned case manager provides direct access to production staff—no call center barriers.

Contact details

Let’s connect.

Whether you are sending your first digital case or looking for a long-term laboratory partner, we are ready to help.

Please enable JavaScript in your browser to complete this form.

Want to get in touch directly? Reach out to our sales representative via WhatsApp at +8618925410015 for a quick response and a price quote!