
Factory Tour
Inside Istar Dental Lab
A look inside our facilities, teams, and workspaces.
istardentallab.com
Skip to contentExplore our factory, follow the production process, and see how your cases are prepared for shipping.


A look inside our facilities, teams, and workspaces.

Our sandblasting units at work, cleaning and surface-preparing metal frameworks and restorations before the next production step.

The 3D printers we use to produce precise working models from your intraoral scans.

Production Process
From incoming scan files to restoration design.

See the equipment and production steps behind each case.

A closer look at the hands-on finishing process.

A technician builds up porcelain layer by layer to recreate natural shade, translucency and tooth form.

Denture teeth are positioned on a cast metal framework for a precise fit and predictable results.

Fired porcelain is ground and shaped to refine anatomy, contacts and occlusion.

Teeth are arranged with chairside seating in mind, so the denture needs fewer adjustments at delivery.

Grinding and polishing the acrylic base for a smooth, comfortable finish.

How we work toward a seamless, passive fit on an RPD metal framework.

How we make night guards that fit comfortably, so patients keep wearing them.

From stone models to final restorations: the molding stage.

An injection-molded base is sanded and finished, with attention to every detail.

A dental model takes shape on our 3D printer, from liquid resin to finished model.

How completed cases are packed and prepared for shipment.

Finished cases are packed and dispatched for fast delivery to your clinic.

From our lab to your door, anywhere in the world: how each case is packed for international shipping.

Do PEEK dentures keep their fit and retention over time? A closer look at the finished restoration.

How we approach full-arch implant restorations without putting unnecessary stress on the implants.

How we characterise the gingival areas so they look natural rather than like flat pink plastic.

How we design and build long-span bridges to reduce the risk of fracture.

A restoration with no implants and no visible metal clasps for a compromised smile.

Why occlusal force distribution matters in long-span bridges, and how we plan for it.

Custom-made grillz with stone settings, built to fit the patient.

A minimally invasive way to replace a missing tooth.

Comparing a fixed bridge with a telescopic system, and when each one makes sense.

How we reduce prosthetic screw loosening in high-load implant cases.
Dental Guide17 min read
When cementing a porcelain-fused-to-metal (PFM) crown, most guides hand you a list of cement types and leave you to guess. But U.S. practice data shows only 13.8% of PFM crowns are resin-bonded—the…
Read Article
Dental Guide11 min read
The practical questions around glazing zirconia crowns rarely come down to a single yes-or-no answer. A review of monolithic zirconia finishing notes that a standardized finishing protocol for this material has yet…
Read Article
Dental Guide10 min read
A multilayer zirconia crown is milled from one zirconia disc whose shade and translucency change along its vertical axis — more chroma near the cervical zone, more translucency toward the incisal edge.…
Read Article